Electronics & Accessories

Electronic control panels and systems

Electronic control panel Brain

• single phase
• control panel for one or two operators, ideal for swinging or sliding gates
• easy for use thanks to the integrated display
• multiple operating logics
• separate electronic torgue and work times regulation for each operators
• separate movement slowing-down on opening and closing for each operator
• plug in terminals
• prepared for plug in radio receiver
• separate opening and closing limit switches inputs for each operator
• programmable timer input for centralized closure
• input for 8K2 safety sensitive edge
• may also be used with hydraulic operators
• cycle counter

Electronic control panel  HEAD

• single phase
• control panel for one or two operators, ideal for swinging gates
• simple diagnostics, thanks to the leds that indicate the status of the inputs
• multiple operating logics
• electric torgue regulation for the motor
• plug in terminals
• Complete with integrated radio receiver 433.92 MHz memory capacity up to 14 codes (programmable /rolling code and prepare for plug-in receiver
• separate opening and closing limit switches inputs for each operator
• programmable timer input for centralized closure
• input for 8K2 safety sensitive edge
• may also be used with hydraulic operators
• cycle counter
• photo cell in closure
• pedestrian opening input
• output for gate opening warning lamp 24 Vdc
• output for second radio channel allowed control of other automations

Control panel MATRIX

• single phase
• control panel for one operator, ideal for sliding gates and BULL operators 10M/ 15M/ 20M without control panel, equipped with encoder
• easy for use thanks to the integrated display
• multiple operating logics
• detection of obstacles and anti-crush protection thanks to a n innovative electronic system
• electronic torgue regulation for opening and closure
• movement slowing-down on opening and closing
• electronic braking, guarantees precise stopping even with heavy gates
• plug in terminals
• integrated radio receiver 433.92 MHz memory capacity up to 64 codes (programmable /rolling code)
• opening and closing limit switches inputs programmable timer input for centralized closure
• input for 8K2 safety sensitive edge
• cycle counter

Control panel  MISE-RI

• single phase
• control panel for one or two operators, ideal for swinging or hydraulic operators
• simple diagnostics, thanks to the leds that indicate the status of the inputs
• automatic and semi automatic operating logics
• plug in terminals
• integrated radio receiver 433.92 MHz memory capacity up to 64 codes (programmable /rolling code)
• programming step-by-step or open-close input
• accessories for locking valid for electric lock 12 Vac and courtesy light control

Electronic control panel DREAM

• single phase
• control panel for one operator, ideal for rolling shutters or hydraulic operators
• integrated radio receiver 433.92 MHz memory capacity up to 14 codes (programmable /rolling code)
• buttons step-by-step/photo cell inputs
• fixed terminal boards
• regulation of work time and automatic closing
• output for controlling a service light

Electronic control panel THINK

• single /three phase
• control panel for one or two operators, ideal for industrial, sectional or sliding doors
• easy for use thanks to the integrated display
• indicated for applications with intensive use
• anti-crush safety device, thanks to the innovative electronic clutch
• multiple operating logics
• plug in terminals
• prepared for plug in radio receiver
• opening and closing limit switches inputs
• input for 8K2 safety sensitive edge
• pedestrian opening input
• cycle counter

Control panel THINK.P

• single /three phase
• control panel for one or two operators, ideal for industrial, sectional or sliding doors
• easy for use thanks to the integrated display
• indicated for applications with intensive use
• anti-crush safety device, thanks to the innovative electronic clutch
• multiple operating logics
• plug in terminals
• prepared for plug in radio receiver
• opening and closing limit switches inputs
• input for 8K2 safety sensitive edge
• pedestrian opening input
• cycle counter
• open, close, stop buttons integrated

Control panel THINK.I

• single /three phase
• control panel for one or two operators, ideal for industrial, sectional or sliding doors
• easy for use thanks to the integrated display
• anti-crush safety device, thanks to the innovative electronic clutch
• multiple operating logics
• plug in terminals
• prepared for plug in radio receiver
• opening and closing limit switches inputs
• input for 8K2 safety sensitive edge
• pedestrian opening input
• cycle counter
• open, close, stop buttons with self-hold and three-pole door-blocking switch incorporated in the control unit
• resistant box for use in industrial environments, degree of protection IP 55

Electronic control panel START

• single /three phase
• control panel for one  operator 230/400 Vac, ideal for industrial, sectional or sliding doors
• indicated for intensive work cycles applications
• “dead man” function
• fixed terminal boards
• prepared for plug in radio receiver
• opening and closing limit switches inputs
• input for emergency stop button
• output for flashing lamp connecting
• Possibility of connecting an auxiliary capacitator for greater starting torgue of the motor

Control panel BRAIN24

• 24 V dc
• control panel for one or two 24 V dc operators, ideal for swinging or sliding gates
• easy for use thanks to the integrated display
• amperometric anti -crushing control
• multiple operating logics
• separate electronic torgue and work times regulation for each operators
• separate movement slowing-down on opening and closing for each operator
• plug in terminals
• integrated radio receiver 433.92 Mhz memory capacity up to 64 codes (programmable /rolling code)
• separate opening and closing limit switches inputs for each operator
• programmable timer input for centralized closure
• input for 8K2 safety sensitive edge
• cycle counter

Control Panel DILL

• Adjustment of parameters and operating logic using dip switches and pushbuttons
• Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (rolling code / programmable code / ARC).
• Fixed terminal boards. | Automatic, semi-automatic or manned operating logic.
• Automatic adjustment of closing time and working time.
• Step-by-step input configurable as Open.
• Close input.
• SAFE input configurable as photocell, NC or 8k2 sensitive edge.
• LED diagnostics.
• Output for power supply of accessories 24 Vdc 50 mA max.

Electronic control panel LOGICA24.RI

• 24 Vdc
• control panel for one or two operators, ideal for counterweight garage doors series ZED
• amperometric anti -crushing control
• multiple operating logics
• automatic and semiautomatic functions
• simple diagnostics, thanks to the leds that indicate the status of the inputs
• operator electric torgue and speed regulation
• movement slowing-down for opening and closing
• plug in terminals
• integrated radio receiver 433.92 Mhz memory capacity up to 64 codes (programmable /rolling code)
• opening and closing limit switches inputs
• inputs for buttons step-by-step, open, close and stop
•  input for 8K2 safety sensitive edge
• input for photocell on closing

Control panel DA.S04

• 24 Vdc
• control panel for car park saver series VE.SOR with 24 Vdc motor power supply
• plug for DA.RB battery charger card
• possibility for managing up to 4 VE.SOR
• step-by-step input

System CALL

• 4-channel receiver, connected to a GSM module, which makes it possible to use the device by means of a mobile telephone
• control of 4 automations without limit  of the distance
• additional input is use as an alarm device : the call actives the telephone number(s) assigned to this function with a call
• the settings linked to the telephone numbers (settings: store/delete/change) and the rolling code transmitters storage are possible without accessing the control panel and without the necessity for the operator to go out, as they can be done via cell phone
• the input for buffer battery with 12 V dc (optional) with integrated recharge control card guarantees operation of the receiver even during a power cut

Programming system ADVANTOUCH

• create personalized database for each individual receiver being managed, associating each transmitter recorded on the receiver with its owner’s name and surname, notes, telephone number, address, etc.
• records all the transmitters in the programmer memory before going to the installation location and then download the file into the receiver and start-up the system
• removes the transmitters which have been lost or stolen; in a traditional receiver the system memory would have to be completely erased and then the whole block of transmitters in the system would have to be recorded from scratch
• temporarily disable certain specific transmitters in a plant
• passive manage transmitter button and receiver channel associations in multi-channel receiver and transmitter systems
• protects the receiver with a personal access code
• quick restore operations of an installation in event of fault or damage; it will be sufficient to reload the receiver file in the programmer to recreate a virtual identical copy of a damaged receiver
• suitable for work with receivers and transmitters on rolling code

Transmitters

 Transmitters To.Go

• Introduction of the new TO.GO remote control with ARC, 128 bit (Advanced Rolling Code). Available with 2 or 4 channels, (TO.GO2A/4A), the new code guarantees maximum safety thanks to the length of the code transmitted (128 bits compared with the 64 bits of the previous TO.GO version).Are available also transmitters function with Advanced Rolling Code (ARC), but if necessary they can easily be changed into Standard Rolling Code (HCS). (TO.GO2VA / 4VA)
• TO.GO ARC thereby becomes the sole and inimitable transmitter for opening BENINCA’ systems, guaranteeing maximum safety and reliability. All the versions are compatible with the new ADVANTOUCH programmer.

Transmitters HAPPY.VA

• Introduction of the new Happy remote control with ARC, 128 bit (Advanced Rolling Code). Available with 2 or 4 channels, (Happy2A/4A), the new code guarantees maximum safety thanks to the length of the code transmitted (128 bits compared with the 64 bits of the previous TO.GO version).Are available also transmitters function with Advanced Rolling Code (ARC), but if necessary they can easily be changed into Standard Rolling Code (HCS). (Happy2VA / 4VA)
• Happy ARC thereby becomes the sole and inimitable transmitter for opening BENINCA’ systems, guaranteeing maximum safety and reliability. All the versions are compatible with the new ADVANTOUCH programmer.

Transmitters HAPPY.AK

• Happy series transmitters are available with 2 (HAPPY.2AK) or 4 (HAPPY.4AK) channels. Interchangeable wine cover has soft lines, a sign of essential design. Available accessories: three different coloured covers respectively for the version with 2 or 4 channels. (FLIP.2/FLIP.4)
• Double code, Advanced Rolling Code to guarantee maximum security due to the length of the transmitted code (128 bit) and the high number of possible combinations, and Fixed Code.
• The AK series transmitters allow duplication from remote (without accessing the system) of fixed code transmitters.
• Easy access to the battery and to the transmitter type, located on the front under the coloured cover.

Transmitters IRI.TX4VA

• Rolling code transmitter 433.92 MHz with 4 channels with ARC or HCS encoding (settable). The new code guarantees maximum safety thanks to the length of the code transmitted (128 bits).
• In transmitters with double code it is possible to use the ARC encoding, switch to Rolling Code or use the transmitter with both encodings (mixed code).

Transmitters IRI.TX4AK

• Rolling code transmitter 433.92 MHz with 4 channels. Cloneable version that allows for creating a duplicate of a Fixed Code transmitter already stored or can be used as a normal ARC encoded transmitter. The ARC encoding system represents the evolution of the old Rolling Code. Thanks to the length of the transmitted code (128 bits), the encoding Advanced Rolling Code guarantees the highest anti-cloning protection.
• Transmitters with ARC encoding and fixed code can be used both in installations characterised only by ARC encoding, and in new or existing installations, in which transmitters with fixed or programmable code have been memorised.

Button/Transmitter Apple

• button for automation control
• the button becomes transmitter, when pull out it from the holder
•  433.92 MHz rolling code system, extremely reliable, with over than 18 billion code combinations
• over 100 m range in open area
• 2 or 4 channels to control different automations or lamps
• compatible with all 433.92 MHz rolling code receivers

ACCESSORIES

Cards reader BE.PROXY

• reader for transponder devices for outside mounting
• reading distance 2-5 cm

Receiver BE.READ

• two-channel receiver for reader BE.PROXY with two relay outputs
• synchronized or bistable operating mode
• memory capacity – 250 cards

Transponder devices TEO/TEO CARD

• transponder device in card or key holder format
• intended for proximity reader BE.PROXY

Digital Pad BE.PLAY

• elegant design
• back lighted digital pad for an easy use in darkness
• die-cast aluminum container against vandalism, protection level IP 54
• safe and reliable, thanks to the high number of possible combinations of the codes
• easy for mounting in existing installation – only 2 wires are need to connect the digital pad to the receiver
• can be installed on a metal post by means of a special adaptor

Photocells Pupilla

• 24 V ac/dc synchronize surface mounting photocell
• turning trough 180°
• possible to synchronized up to 4 couples photocells

Photocells Pupilla.B

• couple photocells for surface mounting,
• turning trough 220°
• Solar panel to recharge transmitter battery
• presence of led with diagnostic function

Photocells KREX

• Compact photocell with double lens equipped with reflector, 24÷240 Vac/dc power supply

Photocells FTC.S

• power supply 24 V ac/dc
• for surface synchronized mounting
• possible to synchronized up to 4 couples photocells

Universal LED flashing light Lamp Star

• LED
• power supply 12 ÷ 250 Vac / dc
• with built-in antenna

IRI.LAMP

• Universal LED flashing light. Only one model to manage all power supplies from 20 to 255 V both alternate or direct. Only 1 W of maximum power absorbed. IRI.LAMP is provided with the blinking function as standard, but it can be installed also on systems that already have this function.Provided of a built-in aerial.
• IRI.LAMP is projected to make the installation easier and quicker.

Receiver ONE2.WI

• 433.92 MHz 2 channels universal plug-in receiver. Suitable for rolling code, programmable code and advanced rolling code.
• The first memorized transmitter will set up the kind of accepted code.

Receiver ONE2.WB

• 433.92 MHz 2 channels universal receiver, in box.Suitable for rolling code, programmable code and advanced rolling code.
• The first memorized transmitter will set up the kind of accepted code.

Receiver ONE4.WB

• The new ONE.4 receiver with wide-range 90÷255 Vac 50/60 Hz supply, manages the Benincà triple radio code (Advanced Rolling Code, Rolling Code and Fixed Code).
• The new ARC code, the Advanced Rolling Code, is one of the important novelties of 2016 and guarantees absolute safety due to the length of the 128 bit transmitted code

Receiver ONE2.WO

• The new receiver 433.92 MHz, 2 channels, suitable for three codes namely Advanced Rolling Code, Rolling Code and programmable code, in the new box for external installation (IP54). The first memorised transmitter will set up the kind of accepted code. Like the other receivers of the series ONE, it allows memorising up to 512 transmitters and it is compatible with the controller ADVANTOUCH. Safety and a completely renewed design allow achieving the best integration in every residential context

Antenna AWO

• The 433.92 MHz frequency antenna extends the radio coverage of your system so that it works perfectly in settings where you want to ensure maximum range for the radio controls.The new model has been developed from the previous AW antenna and features an elegant IP54-rated external box so that it fits in perfectly with any residential setting and can be installed in any automated system.

Wireless metal detector Commercial

Magnetic field and radar detection

Quick and easy installation

Compact profile – 28mm height x 220mm diameter (IP68)

It is not affected by the movement of the earth

10600 mA battery providing up to 6 years of battery life (depending on usage)

128 bit encryption with high security

Range 50 meters

Made of impact-resistant plastic (static load limit of 10 tons)

Commercial inground wireless metal detector

Dual sensor technology. (EL00IG-RAD only)

Installation – 55 mm underground

Diameter 89 mm (2.1 x 3.5 inches)

14500 mA battery (included)

6-10 years battery life (depending on mode)

Top access for battery replacement

Wireless metal detector Domestic for home use

Quick and easy installation

Small compact design (120 mm x 120 mm x 30 mm height) (4.7” x 1.1”)

Static load capacity 2500 kg (5500 Ibs)

Uses standard 1.5V AA lithium batteries (included)

Provides up to 3-4 years of battery life

128-bit encryption with high security

Range up to 50 meters